M-14™ Practice Disc Golf basket

The M-14™ Practice Disc Pole Hole® is designed to be a consumer-friendly version of our standard line of disc catching devices. This basket weighs only 25 pounds and snaps together, no bolts necessary. It's easy to put together and easy to take apart.

The product fills a void for inexpensive practice Disc Pole Holes, allowing the novice, advanced, and pro players the ability to practice and play Disc Golf wherever they want.

The M-14™ is protected by silver zinc plating and is guaranteed for 1 year against failure caused by rust and corrosion.

The M-14™ comes in a special box protected by an outer shipper. The box comes with game information, throwing instructions and illustrations on how to throw as well as the rules of various Disc Golf games the M-14™ can be used for.

POLE (52 in. ) - 1 1/4 in. O.D. Silver zinc plating.

POLES - There are two poles that join as one to hold the assembly. The top pole has only one push button and that one holds the chain assembly. The top pole has one end sweadged to fit the bottom pole. Insert swedged pipe and tap until snug. Note: A piece of 2" x 4" wood or a hammer, or both may be required. Do not attempt to disassemble pipe. It also has two push buttons to mount the base to the pipe, the basket and the chain holder, last.

CHAIN ASSEMBLY - Welded and hot-dipped galvanized. 7 outer sliding links and chains, 7 midway lifter hooks and chains, 6 inner pipe protectors and chains. All 14 chains assembled with heavy duty "S" hooks to allow freer movement of chains. 6" Sleeve - with a quick release push button fastening system for fast assembly or disassembly.
Rod Assembly - 1/4 in. steel rod.

CHAIN ASSEMBLY INSTRUCTIONS - Slide Chain Assembly, (chain ring first), down pole. Align holes in collar with the push button at the top of the pole. Fasten by pushing the button then sliding the collar over the button until the button snaps out the mounting hole.

BASKET ASSEMBLY - 1/4 inch steel rod, welded and Silver zinc plated. 6 in. Sleeve - with a quick release push button fastening system for fast assembly or disassembly.

BASKET ASSEMBLY INSTRUCTIONS - Slide Basket Assembly down pole, (basket facing up), until holes in collar align with the push button in the middle of the pole. Fasten by pushing the button then sliding the collar over the button till the button snaps out the mounting hole.